MSF8000 split type electromagnetic flowmeter product overview

The Bebur MSF8000 split type electromagnetic flowmeter consists of a sensor and a converter.It is used to measure the volume flow of conductive liquids with a conductivity of≥2.5uS/cm and is an inductive instrument for measuring the volume flow of conductive media.It is widely applied in flow measurement in industrial sectors such as petroleum,chemical engineering,metallurgy,light textile,papermaking,environmental protection,food,as well as in municipal management,water conservancy construction,river dredging and other fields.

MSF8000 split type electromagnetic flowmeter product features

◆The measurement is not affected by the change of fluid density,viscosity,temperature,pressure and conductivity. 

◆There are no flow blocking components inside the measuring tube of the pipeline electromagnetic flowmeter.No pressure loss and low straight pipe section requirements.and is self-adaptive when measuring slurry. 

◆Reasonable selection of electrodes and lining materials,that is,the materials with good corrosion and wear resistance properties. 

◆All digital processing,strong anti-interference ability,reliable measurement,high precision and wide flow measurement range. 

◆Ultralow-EMI power supply,which boasts a wide range of voltage and good anti-EMI performance. 

◆With ARM Cortex-M332-bit processor and 24-bit ADC data acquisition system,this product has fast operation speed,high precision,low-frequency rectangular wave excitation and programmable excitation frequency(so flow measurement is stable) an low power consumption. 

◆With SMD devices and surface mounting(SMT)technology,the circuit is highly reliable. 

◆The measuring range can be modified online according to the actual needs of the user. 

◆High-definition backlight LED display,Chinese and English menus,easy to operate,easy to learn and understand. 

◆RS485,RS232,HART and MODBUS digital communication signal output(optional). 

◆Self-test and self-diagnosis function. 

◆Hourly total recording function,record the total flow volume in hour,applicable to time-sharing metering system(optional). 

◆There are three internal calculators to display the forward accumulation,reverse accumulation and difference accumulation,and the internal power-down clock is equipped to record 16 power-down times(optional) 

◆Infrared handheld actuator,115KHZ communication rate,remote non-contact operation of all functions of the converter(optional).

MSF8000 split type electromagnetic flowmeter working principle

The electromagnetic flowmeter functions based on Faraday law of electromagnetic induction,which states that a conductor moving in a magnetic field will generate induced voltage.

Liquid can be regarded as conductor,and the magnetic field is generated by the energized coil outside the flow pipe.

The induced voltage amplitude is directly proportional to the velocity of motion of the conductor and the type of conductor,the diameter of the pipe,and the strength of the magnetic field,which is given by: E=B-V-D-K 

E-Induced potential;

B-Magnetic induction intensity; 

V-Velocity of movement of the conducting fluid; 

D-Electrode spacing;(measure the tube diameter) 

K-Coefficient related to magnetic field distribution and axiallength(instrument coefficient); B,D,and K can either be fixed or calibrated,so that the equation is simplified as E∝V.

The sensor transmits the induced potential E as a flow signal to the converter.Upon signal processing such as amplification,transformation,and filtering,the instantaneous flow and accumulated flow are displayed by a dot-matrix LCD with backlight.

The converter has 4-20mA output,alarm output and frequency output,and is equipped with RS485 and other communication interfaces,with HART and MODBUS protocols supported.

Technical Data

Lining Material

Electrode Material